全国服务咨询热线:

021-39526589

当前位置:首页  >  产品中心  >  意大利ODE  >  ODE电磁阀  >  ODE两位两通常闭电磁阀规格型号

ODE两位两通常闭电磁阀规格型号

简要描述:ODE两位两通常闭电磁阀规格型号
主体孔中的开口打开通过不平衡是上下之间的压力
膜片(或活塞)的表面与直接作用该柱塞固定在隔膜上。
by means of the rod, pushes the gasket holder into a position
that closes the orifice, preventing fluid flow.
Notes:

  • 产品型号:
  • 厂商性质:经销商
  • 更新时间:2023-07-31
  • 访  问  量:706

详细介绍

ODE两位两通常闭电磁阀规格型号
功能是基本上类似于具有导控制的电磁阀
于隔膜运动除了即使用
入口和出口之间的小压力差,起作用
通过柱塞的直接作用确保膜片。
因此,在这种情况下,当线圈不通电时在腔室上方有压力下的流体
膜片下面有压力只有在主孔外部的区域:
因此在隔膜上的力的结果是推动它以关闭主孔口。
2 way normally open direct acting solenoid valves have an inlet
pipe and a outlet pipe. The plunger, acting on the gasket holder
by means of a rod, provides for opening and closing the solenoid
valve. When the coil is not energized the gasket holder, under
the action of a spring, is kept in such a position that the orifice is
open, permitting fluid flow.

ODE两位两通常闭电磁阀规格型号
When the coil is energized the plunger moves downwards and,
当线圈通电时,运动其上安装有垫圈的柱塞打开
孔在整个膜片(导孔)和放电腔室上方的隔膜。
2路常闭复合操作电磁阀具有入口管和出口管。
In this solenoid valve family an increase in pressure causes an
increase in the force required to open the valve: if the pressure
difference between inlet and outlet is greater than the maximum
value for which the valve has been designed, the latter may not
reopen even with the coil deactivated.
因此,如果阀门打开时的入口压力,高于1巴,就是不建议使用具有自由出口的阀本身,
即没有出口限制带来
压力下降到1巴的值。此外,在设计液压回路时必须特别注意问题水锤击可能导致过压,
如撕裂隔膜或损坏电磁阀的其他部件。

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

全国统一服务电话

021-39526589

电子邮箱:18917038407@163.com

公司地址:上海嘉定嘉涌路99弄6号713

沪公网安备 31011402005370号