产品简介

英诺冠单作用气缸，PVA/8040/M/400/UR1
Maintenance and testing: Maintenance and testing must be carried out according to the relevant national regulations

英诺冠单作用气缸，PVA/8040/M/400/UR1

中位 16l/min（P1=10bar和P2=0bar）；
2位使用可选择低泄漏型􀇈􀇈＜1Nl/min
安装方式: 任意􀇈􁍌好电磁线圈向上
流动方向: 1→4+2→3；1→2+4→5
环境温度: 0°C ~ +60°C
流体温度: 0°C ~ +60°C（无冷凝物）
使用寿命：超过􀀳250m􀀶􀀱􀁮（􀇄􀇄􀀲􀀲􀀲􀀱􀀱􀀱􀀱􀀱􀀱􀀦􀀦􀀦行程）􁂜􁂜􁂜􁂜􀗲􀗲􀗲􀗲􀇅􀇅􀇅􀇅
重量: 1.165kg
防护等: IP65
动作时间状况：
P1=6bar，􀇈􀀲􀀲􀀱􀀱􀀱􀀱􀀦􀀦行程，排入大气􁂜􁂜􁂜􀗲􀗲􀗲􀇈􀇈􀇈􀲇􀲇􀲇􀷇􀷇􀷇􀙷􀙷􀙷􀴘􀴘􀴘
关闭时间: 3ms
提升时间（10%~90）%:5msRemove the plastic sealing caps from the exhaust ports.
When connecting up the piping, ensure that no foreign matter such as chips, sealing compound, scale, etc. enters the
piping system, since this may cause malfunctions. The pipes should be as short as possible and pipe bends should be
used instead of pipe angles. The port size of the pressure reducing valve, filter and lubricator must be the same as the
supply port ‘P’ of the press safety valve.
The operating pressure in the valve must never fall below 2 bar, since a lower pressure will inevitably lead to
malfunctions （install pressure switch!）.
Silencers should not affect the proper function of the press safety valve. They should be fitted in accordance with the
local accident prevention regulations.
Control system: A safe control system meeting regulations EN 692 （Mechanical Press Safety） and EN 954-1 （Safety of
Machines...） is a basic requirement.
Maintenance and testing: Maintenance and testing must be carried out according to the relevant national regulations
and the specifications of the relevant local safety associations. Maintenance and testing must be carried out only by qualified
and trained personnel.

英诺冠单作用气缸，PVA/8040/M/400/UR1